Foto | N.º de Parte del Fabricante | Disponibilidad | Cantidad | Hoja de Datos | Serie | Embalaje | Estado del producto | Resistencia (Ohmios) | Tolerancia | Potencia (vatios) | Interruptor integrado | Número de vueltas | Características | Conicidad | Número de grupos | Tipo de ajuste | Coeficiente de temperatura | Rotación | Material resistivo | Estilo de terminación | Tipo de actuador | Longitud del actuador | Diámetro del actuador | Rosca de buje | Tipo de montaje |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
LHK15-30-SLINEAR POT HALL EFFECT SINGLE ETI Systems |
2 |
|
![]() Tabla de datos |
LHK15-30 | Bulk | Active | 10k | ±0.5% | - | None | 1.0 | - | Linear | 1 | Side Adjustment | - | - | - | Wire Leads | Round | 1.339" (34.00mm) | 0.157" (4.00mm) | - | Chassis Mount |
![]() |
SP30B-10KPOT 10K OHM 1.5W PLASTIC LINEAR ETI Systems |
8 |
|
![]() Tabla de datos |
SP30B | Bulk | Active | 10k | ±10% | 1.5W | None | 1.0 | - | Linear | 1 | User Defined | - | 320° | Conductive Plastic | Solder Turret | Round | 0.813" (20.64mm) | 0.250" (6.35mm) | 3/8-32 | Panel Mount |
![]() |
LCP12Y-12-10KLINEAR POT 10K OHM 0.2W PLASTIC ETI Systems |
5 |
|
![]() Tabla de datos |
LCP12Y | Bulk | Active | 10k | ±20% | 0.2W, 1/5W | None | 1.0 | - | Linear | 1 | Side Adjustment | ±400ppm/°C | - | Conductive Plastic | Solder Turret | Round | 1.240" (31.50mm) | 0.250" (6.35mm) | - | Surface Mount |
![]() |
LCP12Y-50-5KLINEAR POT 5K OHM 0.2W PLASTIC ETI Systems |
5 |
|
![]() Tabla de datos |
LCP12Y | Bulk | Active | 5k | ±20% | 0.2W, 1/5W | None | 1.0 | - | Linear | 1 | Side Adjustment | ±400ppm/°C | - | Conductive Plastic | Solder Turret | Round | 1.240" (31.50mm) | 0.250" (6.35mm) | - | Surface Mount |
![]() |
LCP12Y-50-10KLINEAR POT 10K OHM 0.2W PLASTIC ETI Systems |
3 |
|
![]() Tabla de datos |
LCP12Y | Bulk | Active | 10k | ±20% | 0.2W, 1/5W | None | 1.0 | - | Linear | 1 | Side Adjustment | ±400ppm/°C | - | Conductive Plastic | Solder Turret | Round | 1.240" (31.50mm) | 0.250" (6.35mm) | - | Surface Mount |
![]() |
LCP12Y-100-10KLINEAR POT 10K OHM 0.2W PLASTIC ETI Systems |
3 |
|
![]() Tabla de datos |
LCP12Y | Bulk | Active | 10k | ±20% | 0.2W, 1/5W | None | 1.0 | - | Linear | 1 | Side Adjustment | ±400ppm/°C | - | Conductive Plastic | Solder Turret | Round | 1.240" (31.50mm) | 0.250" (6.35mm) | - | Surface Mount |
![]() |
HSM22-XPOT HALL EFFECT IC DUAL OUTPUT ETI Systems |
1 |
|
![]() Tabla de datos |
HSM22 | Bulk | Active | 10k | ±0.5% | - | None | 1.0 | - | Linear | 1 | User Defined | - | 360° | - | Wire Leads | Flatted | 0.910" (23.11mm) | 0.236" (6.00mm) | M10 x 0.75 | Panel Mount |